TestEquipmentInsulationTesters When 1kV just isn’t enough. MIT2500 Insulation and Continuity Tester, CAT IV, 600V Ever need more than 1000 V of power when you’re out in the field? Well, you’ve come to the right place. The MIT2500 insulation and continuity tester puts plenty of power right in the palm of your hand! It’s designed for electrical and industrial test applications where operation voltages exceed 1000 V and higher insulation test voltages are needed. It offers both fixed-range voltages of 50 V, 100V, 250 V, 500 V, 1000 V and 2500 V, as well as a variable range that allows any voltage between 50 V and 2500 V to be “dialed in.” This is supported by the new test voltage feedback control, which maintains the output test voltage to within 2% of the selected range, even when under test, providing a more accurate test voltage without the risk of over-voltage damage to circuits. The MIT2500 features a redesigned case, back-stand, and 6-cell battery compartment, while incorporating a guard terminal to reduce surface tracking currents that reduce accuracy at higher voltages. All instruments are over-molded for increased protection, and achieve an IP54 weatherproof rating. Insulation testing up to 2.5 kV and 200 GO range in a hand-held instrument. Guard terminal for high-resistance accuracy. ¦ Adjustable insulation test voltage from 50 V to 2500V ¦ Stabilized insulation test voltage ¦ Single range, faster continuity testing from 0.01 O to 1 MO ¦ Polarization Index (PI) & Dielectric Absorption Ratio (DAR) ¦ Analog arc with pointer ¦ CAT IV 600V safety design ¦ Recharging options ¦ Bluetooth compatible Includes: 2.5 kV rated test leads with alligator clips, 1 kV rated standard test leads with probes and clips, (6) AA alkaline batteries and hard carry case. No. 717TE2500................................................$1,512.94 MIT400/2 Series Insulation Testers Insulation and continuity tester is designed for an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance and more. Enhanced insulation testing with feedback- controlled test voltages to limit over-voltage to 2%. A variable range has been added to allow any intermediate voltage from 250V to 1000V in 10V steps, where application specific test voltages are required that do not appear in the standard ranges. Continuity testing is now significantly faster, and a single autoranging function replaces the "ohms" and "kOhms" ranges. Features: Insulation testing up to 1000 V and 200 GO, variable 10V to1000V test voltage, auto-hold on continuity tests, 600V TRMS AC & DC voltage measurement, single range, fast continuity testing from 0.01..to 1 M. Live circuit detection and protection, PI/DAR and timer function (except 400/2). Redesigned ergonomic case, back-stand, and 6-cell battery compartment, test result storage and Bluetooth® wireless data transfer (depending on model). IP54 & CAT IV 600 V rating Includes: Silicone test leads with clips, rugged instrument rubber boot with built-in stand, three-year warranty and hard carry case. No. 717TE4002 (MIT400/2) ..........................$645.00 Extended voltage range testing with PIR, PI, and timed testing. No. 717TE4102 (MIT410/2) ..........................$772.49 Test result storage and charging capability. No. 717TE4202 (MIT420/2) ..........................$804.02 Storage and Bluetooth downloading. Measure earth/ground electrode resistance quickly without disconnecting the ground. Clamp-on Earth/Ground Tester Megger has taken what is now a standard test method and significantly improved its field applicability. These advanced clamp-on ground resistance testers set new standards for access, performance, features, simplicity of operation and safety. Short body length makes hard-to-reach ground spikes more readily accessible. Flat core clamp ends prevent dirt build-up, ensuring measurement integrity and improved reliability over products with interlocking teeth. Large elliptical head shape lets you test round cables up to 37 mm diameter and ground tapes/straps up to 55 mm wide. Ultra-long battery life for up to 24 hrs. continuous use. ¦ Large elliptical clamp design ¦ Smooth mating surfaces on the clamp head ¦ CAT IV 600 V safety rating ¦ Automatic noise filter ¦ Visual and audible resistance and current limit alarms ¦ Backlit display for low-light environments ¦ Intelligent data hold function ¦ Stores up to 256 records with time-and date-stamped results Includes: (4) AA batteries, calibration check loop, wrist strap, user guide and hard case. DET24C also includes USB IrDA dongle and PowerDB Lite software. No. 717TE014 (DET14C) ........................$1,578.72 As above, plus 2,000 record memory and PC download capability. No. 717TE024 (DET24C) ........................$1,750.76 1555 and 1550C Insulation Resistance Testers Now you can conduct the entire range of test voltages specified in IEEE 43-2000. The new 1555 and redesigned 1550C offer digital insulation testing up to 10 kV, making them ideal for testing a wide range of high-voltage equipment including switchgear, motors, generators and cables. With measurement storage and PC interface, they’re the perfect tools for preventative or predictive maintenance programs. Best-in-class Three-Year Warranty ¦ CAT III 1000 V, CAT IV 600 V safety rating ¦ Warning function alerts to line voltage and gives readings up to 600 V ac or dc for increased safety ¦ Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V ¦ Stores up to 99 memory locations with unique, user defined labels for easy recall ¦ Over 750 tests between battery charges ¦ Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup ¦ Guard system eliminates the effect of surface leakage current on high-resistance measurements ¦ Large digital/analog LCD for easy viewing ¦ Capacitance and leakage current measurement ¦ Ramp function for breakdown testing ¦ Resistance measurements up to 2TO ¦ Timer settings up to 99 minutes Includes: Test cables with alligator clips, infrared adapter with interface cable, FlukeView Forms software, AC power cord, installation guide, and soft case. No. 374TE1557 Model 1555 -10kV ..................................$5,262.39 No. 374TE1555 Model 1550C -5kV ..................................$4,756.39 136 www.techni-tool.com • Phone: 800-832-4866 • Fax: 800-854-8665
Magnified View - Please use mouse to move page for easier readability